Track Profile 25 40x40, natural
SP0851N
Cut to length max. 6000 mm SP0851N
Application
For holding guide shaft 25 without screws in the manufacture of linear guidance systems. This stable clamping design gives the complete system a high load bearing capacity.
Scope of delivery
The delivery is made as a cut profile (without corrugations). When ordering, please state the desired length in mm. Please note that most profiles cannot be supplied over a length of 6 metres.
If a larger dimension is required, please contact our sales department.
The matching shafts and their machining can be found under item numbers SL0188G or SL0189G.
| Width | 61.6mm |
| Height | 40mm |
| Weight | 3.3kg |
| Area | 12.230cm2 |
| Ix | 35.080cm4 |
| Iy | 18.740cm4 |
| Wx | 9.684cm3 |
| Wy | 9.087cm3 |
| eClass Id | 35070290 |
| Customs tariff number | 76042990 |
| N | |
| mm | |
| Gravity g = | 9.81 m/s2 |
| Modulus of elasticity E = | 70 kN/mm2 |
| Ix = | 35.080 cm4 |
| Iy = | 18.740 cm4 |
| m/Meter = | 3.314 kg |
| f = | x mm |
| f1: | Bending with self-weight |
| f2: | Bending through influencing force [N] |
| f3: | Resulting deflection |
On two stilts, distributed load
| f1 | f2 | f3 | |
|---|---|---|---|
| about the x-axis | 0 | 0 | 0 |
| about the y-axis | 0 | 0 | 0 |
| f = | 5 • F • l3 |
| 384 • E • I |
Fixed one-sided, pointloading
| f1 | f2 | f3 | |
|---|---|---|---|
| about the x-axis | 0 | 0 | 0 |
| about the y-axis | 0 | 0 | 0 |
| f = | F • l3 |
| 3 • E • I |
On two stilts, pointloading
| f1 | f2 | f3 | |
|---|---|---|---|
| about the x-axis | 0 | 0 | 0 |
| about the y-axis | 0 | 0 | 0 |
| f = | F • l3 |
| 48 • E • I |
Fixed two-sided, pointloading
| f1 | f2 | f3 | |
|---|---|---|---|
| about the x-axis | 0 | 0 | 0 |
| about the y-axis | 0 | 0 | 0 |
| f = | F • l3 |
| 192 • E • I |