Track Profile 40x40, natural
SP4101N
Cut to length max. 6000 mm SP4101N
Application
For holding guide shaft 16 without screws in the manufacture of linear guidance systems. This stable clamping design gives the complete system a high load bearing capacity.
Scope of delivery
The delivery is made as a cut profile (without corrugation). When ordering, please state the desired length in mm. Please note that most profiles cannot be supplied over a length of 6 metres. If a larger dimension is required, please contact our sales department. The matching shaft and its machining can be found under item numbers SL0184G or SL0185G.
| Width | 40mm |
| Height | 40mm |
| Weight | 2.6kg |
| Area | 9.530cm2 |
| Ix | 18.350cm4 |
| Iy | 13.600cm4 |
| Wx | 6.120cm3 |
| Wy | 6.800cm3 |
| eClass Id | 35070290 |
| Customs tariff number | 76042990 |
| N | |
| mm | |
| Gravity g = | 9.81 m/s2 |
| Modulus of elasticity E = | 70 kN/mm2 |
| Ix = | 18.350 cm4 |
| Iy = | 13.600 cm4 |
| m/Meter = | 2.583 kg |
| f = | x mm |
| f1: | Bending with self-weight |
| f2: | Bending through influencing force [N] |
| f3: | Resulting deflection |
On two stilts, distributed load
| f1 | f2 | f3 | |
|---|---|---|---|
| about the x-axis | 0 | 0 | 0 |
| about the y-axis | 0 | 0 | 0 |
| f = | 5 • F • l3 |
| 384 • E • I |
Fixed one-sided, pointloading
| f1 | f2 | f3 | |
|---|---|---|---|
| about the x-axis | 0 | 0 | 0 |
| about the y-axis | 0 | 0 | 0 |
| f = | F • l3 |
| 3 • E • I |
On two stilts, pointloading
| f1 | f2 | f3 | |
|---|---|---|---|
| about the x-axis | 0 | 0 | 0 |
| about the y-axis | 0 | 0 | 0 |
| f = | F • l3 |
| 48 • E • I |
Fixed two-sided, pointloading
| f1 | f2 | f3 | |
|---|---|---|---|
| about the x-axis | 0 | 0 | 0 |
| about the y-axis | 0 | 0 | 0 |
| f = | F • l3 |
| 192 • E • I |